Precautions for the maintenance of marble cutting machinery

Precautions for the maintenance of marble cutting machinery

1. Pay attention to check the equipment parts

Operators should regularly check the marble cutting machinery, such as whether the glaze suction transition network is blocked, the temperature and oil volume of the oil tank, the diaphragm pump and the nozzle, etc. In addition, it is strictly forbidden to wash the electric control box and hydraulic station of the marble cutting machine with water, and pay attention to the lubrication state of the machine's horizontal and vertical guide rails and the surface of the rack.

2. Pay attention to the wear and tear of the equipment

Marble cutting machinery requires daily maintenance of the surface of the parts and protection from damage. In addition, the operator should regularly inspect the cutting head for signs of wear and damage, such as the mixing tube accidentally touching the clamp, which can cause it to be damaged. Also, operators regularly inspect and replace consumable parts of the sand conveying system, such as pipes and fittings.

3. Pay attention to daily cleaning

The operator should pay attention to cleaning the marble cutting machine and the dirt on the guide rail, so as to ensure the daily operation of the bed. In addition, the operator should pay attention to checking the cleanliness of the hydraulic station motor and the fuel tank surface, check the inside of the system and keep it in a better operating state, so as to make the marble cutting machine operate more efficiently.

Not only that, the operator can often observe the condition of the marble cutting machine and check the dustproof devices everywhere during the operation. If the marble cutting machine is found to be damaged and the connection is loose, it should be dealt with in time to prevent external sand and dust from mixing. , thereby damaging the device.