The correct use of electric scissors is related to equipment and personal safety. Please pay attention to the following points:
1, before use, ensure that the power supply is intact, the power plug can be used normally, must be equipped with wire gloves.
2, the operator must concentrate on cutting work, other personnel are prohibited to chat with the operator or in other ways to distract the operator's energy.
3. The material taking staff must remove the material when the operator has indeed finished cutting a piece of work to prevent the occurrence of accidents.
4. In the cutting work, the operator should always pay attention to whether the power cord exceeds the distance of the line itself and is pulled too tightly, to prevent the power cord from being cut and to avoid electric shock and short circuit accidents. If necessary, the material taker should monitor the operator to ensure safety.
5, after work or after cutting, when replacing the blade, and troubleshooting, should be timely unplug the power plug to prevent accidents, do not pull the power cord directly when pulling the plug.
6, do not use other objects to knock the power plug or socket.
7, the use of automatic sharpener: under normal working conditions, the cutting line distance above the knife can be sharpened once, each time should be a reciprocating, there is no need to sharpen the knife many times. Press foot should always be under to prevent blade injury.
The above is the correct use of electric scissors, read carefully, pay attention to safety when using.