Chainsaw Operating Instructions
1. Before operation, check whether the various performances of the chainsaw are in good condition, and whether the safety devices are complete and meet the operational safety requirements.
2. Check that the saw blade must not have cracks, and the various screws of the chainsaw should be tightened.
3. Wear protective glasses for operation, stand on the side of the saw blade, and it is forbidden to stand on the same line as the saw blade, and the arm should not cross the saw blade.
4. The feeding material must be close to the backing mountain, and the force must not be too strong. In case of hard joints, it should be pushed slowly. The splicing should wait for the saw blade 15cm. Do not pull with your hands.
5. Short and narrow materials should be processed with push rods, and planer hooks should be used for splicing materials. For wood that exceeds the radius of the saw blade, it is forbidden to saw it.
Sixth, the electric saw should be powered off for maintenance.
7. For safety reasons, the saw blade must be removed after use.