How to use a miter saw?
In the process of building a house, it is often necessary to cut large pieces of wood or to cut angled pieces of wood when cutting corners. When dealing with these problems, a miter saw is required. So, how to use a miter saw? Answer for you .
Miter saw:
Miter saws are mainly used for cutting large pieces of wood. A miter saw can cut wood at multiple angles, such as house skirting can be cut at various angles.
How to adjust the kerf angle for a miter saw:
Turn on the blue switch beside the armrest, lift the buckle under the armrest upwards, and move the saw angle according to the scale.
Turn on the blue switch next to the armrest, pull the front control lever, and adjust the saw blade tilt angle according to the scale.
After adjusting the angle, push the lever back to lock the blue switch.
The kerf angle and the inclination angle of the saw blade can be adjusted at the same time.
When the wood is too long, pull out the extension rods on both sides to lock.
The baffles provide a fixed support point for the hand when cutting large pieces of wood.
Precautions when cutting wood:
It is strictly forbidden to use wire gloves to operate the miter saw;
Goggles and noise-proof earmuffs should be worn during operation;
Wear a dust mask when operating.