Working principle of wood turning tools carbide tip:

The workpiece rotates, and the turning tool moves in a straight line or a curved line in the plane. Turning is generally carried out on a lathe to process the inner and outer cylindrical surfaces, end surfaces, conical surfaces, forming surfaces and threads of the workpiece.

Process characteristics of wood turning tools carbide tip:

1. It is easy to ensure the position accuracy of each processing surface of the workpiece

a For example, it is easy to ensure the coaxiality requirements

Use the chuck to install the workpiece, and the axis of rotation is the axis of rotation of the lathe spindle

Use the front and rear tops to install the workpiece, and the axis of rotation is the center line between the two tops

b It is easy to ensure the perpendicularity between the end face and the axis. The verticality between the guide rail of the horizontal slide plate and the axis of rotation of the workpiece is required.

2. The cutting process is relatively stable, avoiding inertial force and impact force, allowing larger cutting amount and high-speed cutting, which is conducive to improving productivity.

3. Suitable for finishing of non-ferrous metal parts

When the surface roughness of non-ferrous metal parts is large and the Ra value is small, it is not suitable to use grinding, but turning or milling is required. Higher quality can be achieved when diamond turning tools are used for fine turning.

4. The tool is simple

The turning tool is easy to manufacture, sharpen and install.

1. It is easy to ensure the position accuracy of each processing surface of the workpiece

a For example, it is easy to ensure the coaxiality requirements

Use the chuck to install the workpiece, and the axis of rotation is the axis of rotation of the lathe spindle

Use the front and rear tops to install the workpiece, and the axis of rotation is the center line between the two tops

2. The cutting process is relatively stable, avoiding inertial force and impact force, allowing larger cutting amount and high-speed cutting, which is conducive to improving productivity.

3. Suitable for finishing of non-ferrous metal parts

4. The tool is simple

The turning tool is easy to manufacture, sharpen and install.

Practical application of wood turning tools carbide tip:

Using different turning tools or other tools on the lathe can process various rotating surfaces, such as inner and outer cylindrical surfaces, inner and outer conical surfaces, threads, grooves, end faces and forming surfaces, etc. The machining accuracy can reach IT8-IT7, and the surface roughness Ra The value is 1.6 to 0.8. Turning is often used to process single-axis parts, such as straight shafts, general disks, and sleeve parts. If the installation position of the workpiece is changed or the lathe is properly refitted, multi-axis parts (such as crankshafts, eccentric wheels, etc.) or disc cams can also be processed. In single-piece small batch production, various shafts, discs, sleeves and other parts are mostly processed by horizontal lathes or CNC lathes with wide adaptability; large parts with large diameters and short lengths (length-diameter ratio 0.3-0.8) are mostly Vertical lathe processing. When producing small and medium-sized shaft and sleeve parts with complex shapes, inner holes and threads in batches, turret lathes should be used for processing. When mass-producing small parts with less complicated shapes, such as screws, nuts, pipe joints, shaft sleeves, etc., semi-automatic and automatic lathes are often used for processing. It has high productivity but low precision.

Parameter:

Name: wood turning tools carbide tip

MATL:AL+SUS304

1) 11" handle,

(2) 10" longer handle extension three

(3) Swan Neck Hollower tool

(4) 8-3/8" shafts with a circle, square or diamond

carbide cutter head,an extra spare of each cutter,

and a T20 wrench, all packaged in a presentation

storage box.

Our advantage

1.Always low vibration for smoother operation