High Speed Angle Grinder

Correct use of high speed angle grinder

High speed angle grinder is to use high-speed rotating thin grinding wheel, rubber grinding wheel, wire wheel, etc. to grind, cut, remove rust and polish metal components. Angle grinders are suitable for cutting, grinding and brushing metal and stone, and do not use water. A guide plate must be used when cutting stone. For models equipped with electronic controls, grinding and polishing can also be performed if suitable accessories are installed on such machines.

Method/step

1. When using an high speed angle grinder, you must hold the handle with both hands before starting to prevent it from falling off due to the starting torque, and ensure the safety of personal equipment.

2. The high speed angle grinder must be equipped with a protective cover, otherwise it cannot be used.

3. When the grinder is working, the operator should not stand in the direction of the chips to prevent the iron chips from flying out and hurting the eyes. It is best to wear protective goggles when using it.

4. When grinding thin plate components, the grinding wheel should be in contact with the work lightly, not too hard, and pay close attention to the grinding part to prevent wear through.

5. Handle the angle grinder with care, cut off the power supply or gas source in time after use, and place it properly. It is strictly forbidden to litter or even drop it.

The precautions for the use of high speed angle grinder are as follows:

1. Wear protective goggles, and workers with long hair must tie up their hair first. The angle grinder cannot be machined by holding small parts by hand.

2. When operating, the operator should pay attention to whether the accessories are in good condition, whether the insulated cable is damaged, whether there is aging, etc. After the inspection, plug in the power supply and wait for the grinding wheel to rotate stably before it can work, and then the operation can be carried out.

3. During cutting and grinding operations, there should be no personnel and explosives within one meter around, and do not work in the direction of people to prevent casualties.

4. When the grinding wheel is used up and needs to be replaced, the power supply must be cut off to prevent accidental pressing of the switch, causing unnecessary personnel accidents.

5. When working with dangerous and flammable materials, more than one fire extinguisher must be equipped to prevent disasters. Do the principle of safety first and production second.

6. After using it for a long time of 30 minutes, you should stop and rest for more than 20 minutes, and you can work after cooling down. In the process of long-term use, the temperature is too high, which is easy to damage and cause industrial accidents.

7. When using it, we should use it according to the operating specifications and instructions, and conduct regular inspections, maintenance, and work under the condition of ensuring that it is in good condition, so as to reduce the occurrence of accidents.

ANGLE GRINDER APPLICATION

Metal contouring, grinding and polishing

Cutting ferrous/non-ferrous metal, stainless steel, tile etc

Grinding and Cutting of Wood/Fiberglass/Plastic etc.

Parameter:

Our advantage

1.Powerful motor, full of confidence

Solid materials, durable and reliable

2.Efficient heat dissipation, refuse to burn the machine

Smooth air duct design to achieve three-dimensional heat dissipation of the fuselage

3.A variety of working conditions, one solution

4.Innovation design

5.Excellent Workmanship

6.Accept customized request

7.Competitive factory price

8.High quality

9.Excellent service

The power of the angle grinder is good or small：

1. Ordinary grinding requires that the electric angle grinder must be light and easy to operate, flexible and comfortable to operate, but does not require much force on the machine, so the small angle grinder below 600w is suitable for this type, rather than the power angle grinder above 600w. , this will cause waste, and the angle grinder will be too large to be convenient to use;

2. Use the electric angle grinder for long-term metal cutting, stone carving and other heavy work, and the press will be relatively hard during use. This is more suitable for angle grinders above 800w, because this type of machine has high power. Strong strength, less overload burn-in occurs;

3. In short, if you use it more frequently, try to buy one with the best possible quality, which can be used for a long time, and is also suitable for use in various ways.

Package & Shipping

We usually use standard export packaging.

It is available to provide specific package according to your requirements.

Ningbo/shanghai PORT

Certificates

We can promise the quality, passed the CE certification.

Workshop

Hot Tags: high speed angle grinder, China, suppliers, manufacturers, factory, wholesale, cheap, 4 5 Slide Switch Angle Grinder, High Efficient Powerkin Angle Grinder, Cordless Angle Grinder, 4 5 Variable Speed Angle Grinder, Cut Off Saw 355mm Metal Cutting Machine, sander machine