The correct use of the portable angle grinder is as follows:

1. When using an angle grinder, you must hold the handle with both hands before starting to prevent it from falling off due to the starting torque, and ensure the safety of personal equipment.

2. The angle grinder must be equipped with a protective cover, otherwise it cannot be used.

3. When the grinder is working, the operator should not stand in the direction of the chips to prevent the iron chips from flying out and hurting the eyes. It is best to wear protective goggles when using it.

4. When grinding thin plate components, the grinding wheel should be in contact with the work lightly, not too hard, and pay close attention to the grinding part to prevent wear through.

5. Handle the angle grinder with care, cut off the power supply or gas source in time after use, and place it properly. It is strictly forbidden to litter or even drop it.

The precautions for the use of portable angle grinder are as follows:

1. Wear protective goggles, and workers with long hair must tie up their hair first. The angle grinder cannot be machined by holding small parts by hand.

2. When operating, the operator should pay attention to whether the accessories are in good condition, whether the insulated cable is damaged, whether there is aging, etc. After the inspection, plug in the power supply and wait for the grinding wheel to rotate stably before it can work, and then the operation can be carried out.

3. During cutting and grinding operations, there should be no personnel and explosives within one meter around, and do not work in the direction of people to prevent casualties.

4. When the grinding wheel is used up and needs to be replaced, the power supply must be cut off to prevent accidental pressing of the switch, causing unnecessary personnel accidents.

5. When working with dangerous and flammable materials, more than one fire extinguisher must be equipped to prevent disasters. Do the principle of safety first and production second.

6. After using it for a long time of 30 minutes, you should stop and rest for more than 20 minutes, and you can work after cooling down. In the process of long-term use, the temperature is too high, which is easy to damage and cause industrial accidents.

7. When using it, we should use it according to the operating specifications and instructions, and conduct regular inspections, maintenance, and work under the condition of ensuring that it is in good condition, so as to reduce the occurrence of accidents.

Precautions：

Angle Grinders Classification Compact and Large Angle Grinders, Compact Angle Grinders: Ultra-lightweight, some with safety snapback switch configuration—meet the various requirements of novice diagonal grinder operations; Large Angle Grinders: Powerful , suitable for difficult grinding and cutting operations.

ANGLE GRINDER APPLICATION

Metal contouring, grinding and polishing

Cutting ferrous/non-ferrous metal, stainless steel, tile etc

Grinding and Cutting of Wood/Fiberglass/Plastic etc.

Parameter:

Name	portable angle grinder	Model	AKF-AG20 230mm Angle grinder
Rated Voltage	230V	Rated Frequency	50Hz
Input power	2200W	No-load Speed	6500rpm
*with soft grip	*with soft start	*More powerful motor	*3 position side handle
*with rotary handle	2m VDE cable	without grinder disc