Product introduction

How to use cordless handheld power drill ?

1. Hold both ends of the battery and insert the battery into the battery compartment.

2. Insert the drill bit into the drill hole and tighten it clockwise

3. This button is for shifting gears. Press the index finger up to the top, when it is raised, it is the forward gear direction, and this gear is used for drilling and screwing; press the thumb down to the bottom, and the concave is the reverse gear, in the heavy hole This gear is used for pulling out and backing out screws.

4. The ring marked with numbers is for adjusting strength. The larger the number, the greater the strength, adjust to the appropriate strength against the scale on the electric drill. Generally, punching needs to be adjusted to the maximum to be strong enough to move.

5. Finally, align the hole to be drilled, hold the electric drill with your hand (you must hold it firmly), and press the control switch to use it.

Safe Operating Procedures

1. The shell of the electric drill must be grounded or connected to the zero neutral wire for protection.

2. The wires of the electric drill should be well protected. It is strictly forbidden to drag randomly to prevent crushing and cutting, and it is not allowed to drag the wires into the oily water to prevent the oily water from corroding the wires.

3. You must not wear gloves, jewelry and other items during use to prevent damage to your hands from getting involved in the equipment, and wear rubber shoes; when working in wet places, you must work on rubber pads or dry wooden boards to prevent electric shock.

4. When the electric drill leaks electricity, vibrates, overheats or makes abnormal noise during use, stop working immediately and find an electrician for inspection and repair.

5. When the electric drill does not completely stop the rotation of L, the drill bit cannot be removed or replaced.

6. When there is a power failure to rest or leave the work site, the power supply should be cut off immediately.

7. It cannot be used to drill cement and brick walls. Otherwise, it is very easy to cause the motor to overload and burn the motor. The key lies in the lack of impact mechanism in the motor, and the bearing force is small.

Parameter:

Name	Cordless handheld power drill
Model	GX-BCD03
Voltage	12V
No-load Speed	0-450/0-1450rpm
Max.torque	30N.m
Chuck	0.8-10mm
Remark	Brushless

Our advantage

The main advantage is that they are not limited by the cord, they can be used almost everywhere. Letting you take the tool to the work rather than the work to the tool. Despite the extra weight of the battery, cordless drills are generally lighter than corded models.

1. Innovation design

2. Excellent Workmanship

3. Accept customized request

4. Competitive factory price

5. High quality

6. Excellent service

Package & Shipping

We usually use standard export packaging.

It is available to provide specific package according to your requirements.

Ningbo/shanghai PORT

Certificates

We can promise the quality, passed the CE certification.